AS16-3M9-PP Single-Head Propeller Polisher
(In Stock)
Part #AS16-3MP-PP
Powered by the AS-108 Hydraulic Power Pack

(Shown with optional 3M marine
polishing disc and holder)

Click Here To Read About the Barnacle Cutter!
(AS-BC-6 Barnacle Cutter)

 Single head high speed low-profile designed specifically for propeller polishing using 3M™ Marine polishing discs. Resulting in a high luster finish on even the largest ship's propeller with maximum speed and efficiency.

The AS16-3M9-PP accepts Armada's Barnacle Cutter (Part #AS- BC- 6), which is world's fastest underwater cleaning tool for removing barnacles, zebra mussels, and heavy sea-growth from ship hulls made of wood and steel, sea walls, dock pilings and peers!

  • Generates its own suction force
  • Smallest profile of single head prop polishing available
  • Manual on/off switch
  • When used with a Propeller Roughness Gauge improvements can be documented to comply with USN and ABS requirements.
  • "A rough propeller can generate energy losses amounting to half that of the hull." -- British Ship Research Association
  • "Polishing propellers will result in recovery of 50% of the fuel penalty due to fouling since the ship was last cleaned." -- US Navy
  • Specifications:
    Required Hydraulic power 5 to 7 GPM (18.921 to 26.49 liters per minute)
    Pressure Rating 1700 PSI (11724 kPa)
    Tool Speed 2,000 RPM +/-
  • Maximum Depth: 110 ft. (33.528 m)

Dimensions:18" (457.2 mm)L x 9" (228.6 mm)H x 8"(203.2 mm)W Weight: 12 lbs. (3.18 kg)

Requirements: Powered by Armada's AS-108 Hydraulic Power Pack.

Prices and Specifications Subject to Change Without Notice.
Current Production Model May Be Different in Appearance.

We ship worldwide by air and sea!
Armada Systems, Inc.
Pensacola, FL 32534 USA
Phone (850) 912-8962 Fax (850) 912-8965
E-mail us at armadahull@aol.com

Entire Contents © 1999 Armada Systems.   Reproduction in whole or in part without express written permission is prohibited.